A Tea Addict's Journal

I’ve had this for a couple years now, but I haven’t tried using it until now. Living in an urban environment is not really conducive to using charcoal to boil stuff, especially in a hot place like Hong Kong where the weather is rarely cold enough for this sort of thing. There’s something wrong about lighting it up indoors when it’s 33 degrees outside.

Not having a yard or a barbeque at home, lighting up the charcoal means doing it right in the stove, which is a little harder than the tonnes of space you’re afforded in a barbeque. The easy way to do this is just to light it up in a charcoal chimney or some such, but without any of those tools, I was reduced to starting a fire in these stoves. Obviously, practice makes perfect, and since I don’t have practice, it took a few tries. Turns out, the trick is pretty simple – fan really hard once you’ve got a little fire going in there. Constructing the charcoal so that there’s good airflow is obviously important. Once started, all you have to do is to add enough fuel to make sure there’s enough heat coming off.

Using this setup really does change how you approach the tea. First of all, you don’t have a lot of water to work with, so you’ll economize. If you’re used to throwing water everywhere, well, if you do that with this setup, you’ll be out of water before you get your first brew. With my normal pot, I can get about 4 infusions out of this little kettle. It takes 15 minutes to bring cold water to a boil using this setup. So, obviously, you won’t waste water.

You also need to just sit there and not multitask, because multitasking is impossible. It’s quite easy to walk away from a tea session, attend to something, and then come back and continue if you have an electric setup. With this, you can’t easily do that. The water won’t wait, and will keep boiling, and the fuel also won’t wait. If you go away for 20 minutes, your water will probably boil dry, your kettle might crack, and your fuel might start running low. You don’t want to restart a fire. That’s hard work. There’s a reason in those paintings it’s always the servant boy doing that.

Now, does it actually make any real difference?

I don’t think so. I certainly don’t think any of those claims about “oh, charcoal boiled water is sweeter” or any such thing. Heat is heat, and while the charcoal does smell nice (I used longyan – or longan – wood charcoal), it doesn’t really do anything particular to the water. My normal kettle boils it just as hot, as far as I can tell. The biggest difference is probably atmospherics – you feel different doing this. There’s also probably some difference in the material of the kettle itself – iron, in my case, versus clay. I don’t think the source of heat makes any difference there.

You do, however, learn to love your tea towel, because you need it. For this kettle, the handle gets hot, so without a towel it’s untouchable. If I want to do this a lot, I might want to get a slightly bigger kettle, so that the handle won’t get as hot (but with a definite tradeoff in boiling time) or I can try to buy another kettle with a top handle made of something like rattan.

This sort of setup also forces you to drink certain kinds of tea – I’m not going to drink a puerh that will go on for many infusions, because it’s quite impractical to come back to the tea later on, and so you want to pick something that will be done in a few kettles of water, at most. With that in mind, I picked an older dahongpao. It came out beautifully.